TrueLine Plumbing

Shower and tub repair in Los Angeles

A dripping showerhead, a valve that won’t hold temperature or a slow tub drain. We repair shower and tub plumbing, including worn valves behind the wall.

Book a plumber

Step 1 of 2

What needs fixing?

Most shower problems live behind the wall

The handle you turn connects to a valve inside the wall. When its cartridge wears out, the shower drips, the temperature jumps around, or the water never gets quite hot enough.

Leaks at the valve or drain can soak the wall or the ceiling below without any sign in the bathroom. A stain on the ceiling under a bathroom is a common first clue.

Water spraying from a shower head

Common shower and tub problems

A dripping showerheadA worn cartridge or valve seal.
Temperature swingsThe valve can’t balance hot and cold.
Not hot enoughA worn cartridge or an anti-scald limit set too low.
Low shower pressureMineral buildup in the showerhead or valve.
A slow tub drainHair and soap in the drain or trap.
A stain on the ceiling belowA leak at the valve, drain or overflow.

What we do

  • Replace valve cartridges and seals.
  • Replace old two-handle valves with modern pressure-balancing valves.
  • Repair tub spouts, diverters and showerheads.
  • Clear and repair tub and shower drains.
Worth knowing

Modern shower valves are pressure-balancing, which keeps you from getting scalded when someone flushes a toilet. If your shower still jumps hot or cold, an upgrade is worth considering.

What affects the price

You get a written price before any work starts. These are the things that move it.

Cartridge or valveA cartridge swap is quick. A new valve means opening the wall.
AccessAn access panel makes it easier than a tiled wall.
TrimNew handles and showerheads to match the valve.

Shower & tub repair questions

Why does my shower keep dripping?

Usually a worn cartridge or seal inside the valve. Replacing it typically stops the drip.

Why doesn’t my shower get hot enough?

The cartridge may be worn, or the anti-scald limit on the valve may be set too low. If the whole house lacks hot water, it’s likely the water heater.

Can you replace a shower valve without tearing out tile?

Often, yes, through an access panel on the other side of the wall or by working carefully through the trim opening. It depends on the valve.

Need help with shower & tub repair?

Book online in two quick steps, or call us any time, day or night.

Call nowBook online